conducted heat

英 [kənˈdʌktɪd hiːt] 美 [kənˈdʌktɪd hiːt]

【电】传导热

电力



双语例句

  1. The experiments for different airflow were conducted on an air-to-water heat pump unit and discussed.
    采用试验方法研究了风量变化对中大型风冷热泵机组结霜工况性能的影响。
  2. An experimental investigation was conducted for the heat transfer performance of inter tower section mass transfer coolers.
    对传质型塔间冷却器的传热性能进行了试验研究。
  3. The concept of the underground thermal energy is discussed, and some experiments are conducted on pile heat exchanger, it is helpful to solving the key problem.
    在对地表热能概念进行论述分析的基础上,对桩埋换热器的特性进行了模拟实验,为地源热泵更广泛的应用提供了依据。
  4. Experiments were conducted to investigate the convection heat transfer of deionized water and copper oxide nanoparticle suspensions flowing through mini tubes.
    实验研究了细圆管内去离子水和氧化铜纳米颗粒悬浮液的对流换热特性。
  5. The utility model adopts a method that the solution is released for many times and then the cold effect is conducted again to extend the heat insulating time of the ice bag.
    本实用新型采用了溶液分次释放,冷效应再次进行的办法,延长了冰袋的保冷时间。
  6. For efficiently cooling electronic components, experiments were conducted to study the pool boiling heat transfer performance of FC-72 over silicon chips with surface microstructures.
    针对电子器件的高效冷却问题,对表面加工有微结构的硅片上FC-72的池沸腾换热性能进行了实验研究。
  7. An experimental study was conducted for investigating the heat transfer characteristics of the annular two-phase flow of high velocity nitrogen and subcooled water through a small vertical heated tube.
    利用高速氮气和过冷水在竖直细小管内形成环状两相流并对其传热特性进行了实验研究。
  8. Hydriding combustion synthesis of Mg_2NiH_4 was conducted at different heat treatment regime and hydrogen pressures in self-developed reaction apparatus.
    采用自行设计制作的反应设备,研究了氢化燃烧合成法制备Mg2NiH4的工艺参数。
  9. The theoretical analyses have been conducted for heat transfer and mechanics during laser processing of the steel sheets and analytical solutions have been obtained for two-layer sheets with an axial symmetric pulse laser heating or a moving continuous-wave laser heating and with one& dimonsional switch-Q laser heating.
    本文对硅钢片的激光加工中的传热过程和力学过程进行了理论分析,并导得了双层材料的二维轴对称脉冲激光加热、连续激光移动热源加热以及调Q激光一维加热问题的解析解。
  10. On the basis of thermal computation of Municipal Solid Waste ( MSW) incineration process, a systematic research was conducted on the relationship between heat balance and energy recovery.
    以城市垃圾焚烧过程的热工计算为基础,深入研究了热平衡分析与能量回收之间的关系。
  11. Under the condition of steam condensation outside a horizontal and vertical tube a comparative experimental investigation was conducted for the heat transfer performance of four kinds of experimental tubes.
    在水平及垂直管外水蒸气凝结的条件下,对4种实验管的传热性能进行了比较实验研究。
  12. Based on the non-uniform heat transfer coefficient model, numerical simulations were conducted to investigate the heat sink size effects on the highest temperature and the maximum thermal stress of a side-pumped laser slab.
    以不均匀换热系数模型为基础,数值研究了侧面泵浦板状激光介质在热沉冷却情况下,热沉的几何参数对介质最高温度及最大应力的影响。
  13. An experimental study was conducted on the cross-flow heat transfer in a fixed-bed, and simulated by a two-dimensional model.
    对固定床中流体与换热管呈错流流动的传热进行了实验研究,并以二维传热模型进行模拟。
  14. To determine the respective influence of various heat sources on the magnitude of thermal deformation, experiments are repeatedly and separately conducted with different heat insulation of these sources.
    为了分别了解各热源对热变形大小的影响,应依次对各热源作单独试验。
  15. An extensive experimental study is conducted to determine the heat transfer characteristics of arrays of air jets impinging on perforated target surfaces in turbine blade leading edge regions by six large-scale models.
    为了确定涡轮叶片前缘阵列射流冲击到穿孔靶面的传热特性,本文采用六个放大比例的模型,进行了一系列的实验研究。
  16. Three-dimensional numerical study is conducted to investigate the heat transfer characteristics for the inclined multi-hole film cooling with different configurations.
    对三种不同结构的多斜孔气膜冷却结构进行了数值研究。
  17. Calculation and prototype test are conducted on improved heat dissipating system, the result showed that the improved system met the requirements of design.
    对改进后的液压散热系统进行计算和实车试验,结果表明改进后的系统符合设计要求。
  18. On the theoretical basis of a microlayer evaporation model an analysis is conducted of the intensified boiling heat transfer mechanism of thermosyphon pipe with an internally installed shunt tube structure.
    在微层蒸发模型的理论基础上,对热虹吸管内部设置分流管结构强化沸腾传热进行机理分析。
  19. Based on the experimental studies of the natural convection resulting from heat transfer in a spiral finned tube, the numerical calculation was conducted, the average surface heat transfer coefficient for convection was defined and calculated, which has improved the computed temperature and fin efficiency.
    本文引入区域平均表面传热系数的概念,在实验研究的基础上进行了肋基和肋端温度分布预测及肋片换热数值计算。
  20. Two experiments were conducted to investigate the effects of heat stress on semen quality and some major physiological parameters of Angora rabbits.
    两个试验研究了高温对长毛兔精液质量和某些主要生理指标的影响。
  21. Analyses and discussions were conducted of a non steady heat transfer model for the vertical embedded pipe of a geothermal heat exchanger.
    对地热换热器竖直埋管的非稳态传热模型进行了分析讨论。
  22. With the help of a steady state constant wall temperature method a study was conducted of the heat transfer and resistance characteristics of two air cooled heat exchangers made respectively of three elliptical finned tubes and one circular finned tube.
    用稳态的恒壁温法对3个椭圆翅片管空冷器和1个圆翅片管空冷器的传热和阻力特性进行了研究,得到空冷器空气侧的传热与阻力性能。
  23. A study on the aging life of the cable insulation material caused by heat has been conducted by using heat analysis method. A calculation formula of the aging life of the cable insulation material has been derived.
    利用热分析技术,对电缆绝缘材料的热老化寿命进行了研究,得到了电缆绝缘材料的热老化寿命的计算公式。
  24. A numerical study was conducted of the heat transfer in a circulating fluidized bed boiler furnace. The relevant model being set up takes into account the influence of the concentration distribution of axial and radial particles.
    作者对循环流化床锅炉炉膛传热进行数值研究,所建模型考虑轴向和径向颗粒浓度分布的影响。
  25. With the help of a laminar flow model a numerical calculation was conducted of the forced convection heat transfer of a falling subcooled water film on horizontal tubes under the condition of constant wall temperatures.
    采用层流模型对定壁温边界条件时水平管外垂降液膜的强制对流显热换热性能进行了数值计算。
  26. Tests were conducted of the heat transfer and resistance performance of drop-shaped finned tubes and test results obtained under different air velocities and temperatures are presented.
    对滴状翅片管的传热及阻力性能进行了试验,给出了不同风速、温度下的试验结果。
  27. Experimental study is conducted to investigate the performance of heat transfer enhancement and flow resistance of air longitudinal flow over smooth tube and Petal fin formed tube in shell side of heat exchanger.
    以空气为介质,以纵向流动方式冲刷光滑管与花瓣状翅片管进行管壳式换热器壳程的传热强化与流阻性能实验研究。
  28. A systematic study was conducted on quality of heat which has direct influence on crops growth and development in agricultural area, concerning mature period, crop yield and quality.
    热量是农作物生长发育极其重要的环境条件,直接影响农作物种植区域及生长发育的速度、成熟早晚、产量高低和质量优劣[1]。
  29. Numerical simulation combined with experimental measurement was conducted to study the heat transfer behavior between the high temperature gas and substrate.
    采用数值模拟与试验测量相结合的方法研究了高温载气与基体间的传热行为。
  30. The preliminary experimental research is conducted to the process of heat and moisture transfer in building elements, hence an experimental technique is developed for the indirectly measurement of mass diffusivity and thermo-mass diffusivity of the moist porous media.
    对多层多孔结构内传热传湿过程进行了实验方法的研究和探讨,发展了间接测定多孔材料的质扩散系数和热质扩散系数的实验方法。